Filter
Top Products
3-35190-00601-02 Rev. B
Garmin G600 Pilot’s Guide
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
Glossary Appendix A
Appendix B
Index
Runway Extension Range
The Runway Extension Range option allows you to select the range at and
below that Runway Extensions will be shown from the destination airport
runway. Map ranges above the selected value will not show Runway Extensions.
When Off is selected, Runway Extensions will be shown.
Figure 3-46 Navigation Map Runway Extension Selection
1) While viewing the Navigation Map Setup page and the Aviation Group active,
turn the large MFD knob to highlight the “Runway Extension” option.
2) Turn the small MFD knob to change the highlighted value.
3) Press ENT
to accept the displayed value. The next option will be highlighted.
4) Press the small MFD knob to cancel selection or to end editing and return to
the Navigation Map page or turn the large MFD knob to the next option.