Filter
Top Products
5-21190-00601-02 Rev. B
Garmin G600 Pilot’s Guide
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
Glossary Appendix A
Appendix B
Index
5.5.3.2 Selecting an XM Radio Channel
The Channel feature is used to navigate through the channels in the selected
category.
Figure 5-15 XM Channel Selection
1) While viewing the XM Radio page of the AUX page group, press the small MFD
knob and then turn the small MFD knob to select the desired channel.
2) Press ENT
to make the highlighted channel the Active Channel.
NOTE: A delay of several seconds may occur when selecting a channel.
The listed title may end before the radio begins playing the current Active
Channel material.
3) Press the small MFD knob to cancel selection or to end editing.
Or
4) Press CHNL and then the CH + or CH – soft keys to increment up or down one
channel at a time in the active category.
Or
5) Press CHNL and then the DIR CH soft key to directly select a channel in the
active category. Use the large and small MFD knobs to select desired channel.
6) Press ENT
to save the selection or press the small MFD knob to cancel
selection.