Filter
Top Products
3-52
Garmin G600 Pilot’s Guide
190-00601-02 Rev. B
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
GlossaryAppendix A
Appendix B
Index
3.4.1.5 MFD Display Units
The MFD Display Units options allow you to select the units of measurement
conventions displayed on the MFD. Distance and Speed selections are Imperial,
Metric, or Nautical. Altitude and Vertical speed selections are Feet or Meters.
1) While viewing the System Setup page of the AUX page group, press the small
MFD knob to activate the cursor. Turn the large MFD knob to highlight the
Distance and Speed (DIS, SPD) units of measurement.
Figure 3-65 Distance and Speed MFD Display Units
2) Turn the small MFD knob to select Imperial, Metric, or Nautical and then press
ENT. The Altitude and Vertical Speed units selection will now be highlighted.
3) Turn the small MFD knob to select Feet or Meters and then press ENT.
Figure 3-66 Altitude and Vertical Speed MFD Display Units
3.4.1.6 System Display Units
The System Display Units options allows the selection of units to display
values for Navigation Angle (Magnetic or True), Barometric Setting (inches or
Hectopascals), and Temperature (Fahrenheit or Celsius). Pressing the DFLT
UNIT soft key will restore the Default Unit settings.
1) While viewing the System Setup page of the AUX page group, press the small
MFD knob to activate the cursor. Turn the large MFD knob to highlight the
System Display Units selection titled “Nav Angle.”