Filter
Top Products
3-43190-00601-02 Rev. B
Garmin G600 Pilot’s Guide
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
Glossary Appendix A
Appendix B
Index
Other/ADIZ Airspace Viewing Range
The Other/ADIZ airspace viewing range option allows you to select the map
range and below where Other/ADIZ airspace information will appear on the
MFD. Map ranges above the selected value will not show Other/ADIZ airspace
information. When Off is selected, the information will not be shown.
Figure 3-54 Navigation Map Other/ADIZ Viewing Range Selection
1) While viewing the Navigation Map Setup page and the Aviation Group active,
turn the large MFD knob to highlight the “
Other/ADIZ
Viewing Range” option.
2) Turn the small MFD knob to change the highlighted value.
3) Press ENT
to accept the displayed value. The next option will be highlighted.
4) Press the small MFD knob to cancel selection or to end editing and return to
the Navigation Map page or turn the large MFD knob to the next option.