Filter
Top Products
Time Setup
Use the Time Setup Page to set
the time format and zone, and set
the unit to conform to Daylight
Saving Time. The current time
and date appear at the bottom of
the page.
To access the Time Setup Page:
On the Setup Menu Page, highlight the Time
icon, and press Enter.
Time Zone—choose the time zone for your city so
the Vista Cx will show the correct local time. Select
Other to enter a UTC Offset.
Units Setup
Use the Units Setup Page to
customize measurement units.
To access the Units
Setup Page:
On the Setup Menu Page,
highlight the Units icon,
and press Enter.
• Position Format— sets a coordinate system to
match the type of paper map you may be using.
• Map Datum
—sets the map datum reference
appropriate for the type of paper map you may
be using.
For more information about selecting position
formats and map datums, see page 92 in the
Appendix.
• Distance and Speed
—sets the unit of
measurement for speed and distance traveled.
• Elevation (Vert. Speed)
—sets the unit of
measurement (Feet (ft/min), Meters (m/min),
or Meters (m/sec)) for indicating your altitude.
• Depth
—sets the unit of measurement (Feet,
Fathoms, or Meters) to show the depth.
• Pressure
—sets the unit of measurement
(Inches, Millibars, or Hectopascals) to
indicate pressure.
72 eTrex Vista Cx Owner’s Manual
MAIN MENU > SETUP MENU