Filter
Top Products
Transferring Data to a microSD
™
Card
The eTrex Vista Cx is equipped with a pre-installed
microSD card.
To install or remove the microSD card:
1. Remove the battery compartment cover from
the back of the unit.
2. Locate the card slot at the upper-left edge of
the battery tray, and check to be certain the
card is installed in the slot.
3. Press down on the card and release quickly
to eject it from the slot if you plan to replace it
with a card with more memory.
4. Replace the battery cover when finished.
To transfer map data to the microSD card:
1. Lift the weather cover from the USB port on
the upper back of the unit.
2. Connect the USB cable provided with the unit
to the USB port on your PC and to the mini-
USB port on the back of the unit.
3. Follow instructions for selecting and
downloading maps provided with the
MapSource map data disk.
PUSH TO EJECT
Taiwan
Installing and removing
the microSD card
PUSH TO EJECT
Accessing the microSD
card slot
microSD card
location
Battery
compartment
with cover
removed
USB port
weather cover
USB port
microSD card
inserted in
card slot
Contacts on card
must face away
from the batteries.
Accessing the USB port
eTrex Vista Cx Owner’s Manual 9
GETTING STARTED > USING THE VISTA CX