Filter
Top Products
Track Page Options
The Track Log Setup Page contains the following
options:
• Wrap When Full
—enables this option when
you want to record over the oldest data with
new data when the track log is full.
• Record Method
—sets the method used to
record track points. Distance records track
points after a specific distance is traveled. Time
creates track points after the specified time has
elapsed. Auto allows you to choose from five
different intervals.
• Interval
—records a track according to the
value and interval. Enter a specific distance or
time. The interval field appears only when the
Record Method is set to Distance or Time.
• Color
—sets the color for the track when it
appears on the map.
Routes Page
Use the Routes Page to create a route to a destination.
For more information, see Routes on page 31
Highway Page
When you are navigating a route, the Highway Page
provides guidance to your destination by using data
fields and a graphic highway. Up to four changeable
data fields show information such, as speed, and
distance, time to next point on the route. The list of
data options for display and the method of selection is
the same as for the Compass Page.
Routes Page Route Setup Page
eTrex Vista Cx Owner’s Manual 65
MAIN MENU > HIGHWAY PAGE