Filter
Top Products
To select the course pointer or the bearing
pointer:
1. Press the Menu key to open the Compass
Page Options Menu. The bearing pointer is the
factory set default option. When the bearing
pointer option is shown, the course pointer is
active and vice versa.
2. Highlight this option, and press Enter.
Data Fields
You can show three or four data fields on the Compass
Page.
To show data fields on the Compass Page:
1. Press the Menu key to open the Compass
Page Options Menu.
2. Highlight Data Field, and press Enter. The
Show sub-menu appears.
3. Select the number of data fields you want to
show on the Compass Page (three or four),
and press Enter.
0.25
mi
The course pointer indicates your course of travel from
your original location and the distance off course.
Scale
3 Data Fields 4 Data Fields
54 eTrex Vista Cx Owner’s Manual
MAIN PAGES > COMPASS PAGE