Filter
Top Products
To move a waypoint on the Map Page:
1. On the Find Menu, highlight the Waypoints
icon, and press Enter to open the Waypoints
Page.
2. Select the waypoint you want to move, and
press Enter. The Waypoint Page opens.
3. Highlight the Map button, and press Enter to
show the waypoint on the map.
4. Press Enter again to place a MOVE marker
next to the waypoint.
5. Use the Rocker to move the waypoint to a
new location on the map, and press Enter.
Averaging the Waypoint’s Location
You can average a new waypoint location over time to
produce a more accurate location.
NOTE: You must have a GPS satellite fix
before you can average a waypoint’s location.
You cannot average a waypoint after it has
been saved to the waypoints list and the Mark
Waypoint page is closed as there is no longer
satellite fix for that specific location.
To calculate the average location:
1. Press the Find key to open the Find Menu.
2. Highlight the Waypoints icon, and press Enter
to open the Mark Waypoints Page.
3. Select the waypoint for which you want to
calculate the average location, and press
Enter.
4.
Press the Menu key to open the Options Menu.
5. Highlight Average Location, and press Enter
to open the Average Location Page. The unit
begins calculating the average location of the
waypoint.
eTrex Vista Cx Owner’s Manual 13
BASIC OPERATION > CREATING AND USING WAYPOINTS
Original
location
New location
Moving a waypoint