Filter
Top Products
6. Press Enter to save the location.
Projecting a Waypoint
You can create a new waypoint by projecting the
distance and bearing from one location to a new
location.
To project a waypoint:
1. Press the Find key to open the Find Menu.
2. Highlight the Waypoints icon, and press Enter
to open the Waypoints Page.
3. Select the waypoint you want to project, and
press Enter. The Waypoint Information Page
opens.
4. Press the
Menu key to open the Options
Menu.
5. Select Project Waypoint, and press Enter to
open the Project Waypoint Page.
6. Enter the distance and bearing to the projected
waypoint in the appropriate fields at the bottom
of the page, and press the Quit key when
finished.
Mark Waypoint
Page
Average Location
Page
Project Waypoint
Page
Projected Waypoint on
the Map
14 eTrex Vista Cx Owner’s Manual
BASIC OPERATION > CREATING AND USING WAYPOINTS