Filter
Top Products
your destination. Turns on roadways are added
to the Active Route Page and are preceded by a
guidance message with a graphic of the turn. If
there are not enough roads at your location to
calculate a route, a message appears.
Navigating a Route
After you create a route, you can begin navigation
immediately or save it to the Saved Routes list.
To navigate a saved route:
1. Press the Menu key twice to open the Main
Menu.
2. Highlight the Routes icon, and press Enter to
open the Routes Page.
3. Highlight a saved route, and press Enter to
open the Route Page.
4. Highlight the Navigate button, and press
Enter.
5. To stop navigating, press the Menu key, select
Stop Navigation, and press Enter.
When navigating a route, a guidance message and
a graphic view of turns in the route appear as you
approach each one. Using the Follow Roads option
on the Routing Setup Page increases the number of
turns and shows an Active Route Page with a list of
turns. If you selected the Off Road option, you can
view only the list of points for a route from the Active
Route Page. See Routing Setup on page 69.
To preview the
turns for an active route:
1. On the Routes Page, highlight a saved route,
and press Enter to open the Route Page for
the selected route.
2. Highlight the Navigate button, and press Enter
to begin navigation and show the route on the
Map Page.
Route on the Map Page
Route Page
eTrex Vista Cx Owner’s Manual 33
BASIC OPERATION > CREATING AND USING ROUTES