Filter
Top Products
ABOUT THE AUTOMATIC BRIGHTNESS ADJUSTMENT FUNCTION
This unit uses a brightness sensor to detect the level of luminosity in the
surrounding area and automatically modifies the brightness of the screen in
accordance with the surrounding luminosity.
Do not cover the brightness
sensor with a cloth. This will
disable the detection of
luminosity.
MAIN SPECIFICATIONS
Type Liquid crystal color monitor
Drive system TFT active matrix system
Screen size 7V type
Light source Cold cathode tube
Expansion output terminal
14 pin connector
Power supply input terminal
DC 9V (EIAJ terminal)
GPS exterior antenna input terminal
GPS connector
Brake terminal Mini-jack
Headphone output terminal
Stereo mini-jack
Video I/O terminal
Mini-jack
Audio I/O terminal/
optic digital audio output terminal
stereo mini-jack/optic
mini-jack
S video output terminal S terminal
I/O TERMINAL
Power source AC 120V, 60Hz
DC 12V
Current 2.0A (when using DC-DC)
Power consumption
18W (when using the navigation
system)
Temperature range
32 to +122°F (0 to +50°C)
(when in NAVI or VIDEO mode)
41 to +95°F (+5 to +35°C)
(when in DVD mode)
Exterior dimensions
About 175X42X137mm
(width x height x depth)
*excluding projections
Weight About 800g (main unit only)
* The specifications and design of this unit are
subject to change for improvements without
prior notification.
* The V-type monitor screen size (7V type) is a
standard based on the dimensions necessary
for an effective screen.
OTHER
GPS antenna Micro-strip flat
antenna
Reception frequency 1575.42MHz
(C/A cord)
Reception system 18 channels
parallel
Reception sensitivity –130dBm
Updating Interval About 1 second
Format Original DVD
format
NAVIGATION
Made for the following disc type:
¡DVD video
¡Music CD (CD-DA)
5 inch (12 cm) and
3 inch (8 cm) diameter
Reading format Non-contact optical
reading
(using a semiconductor
laser)
Frequency range 20Hz to 20kHz
(+1.0dB to –2.0dB)
S/N ratio 85dB or more
High harmonic distortion
0.1% or less
Dynamic range 88dB or more
Wow and flutter Within or under the
measurement limit
DVD VIDEO/CD PLAYER
ABOUT THE BRIGHTNESS OF THE BUTTONS
Hint
When the power is turned ON, the characters appearing on the buttons of the unit
(POSITION, MENU, MODE, RETURN, VIEW, ENTER, OUT, IN, t, p, y, ) and
(+, –, ) will light up blue.
p
181 182
As described in “How to adjust the image” (p.178 to 180), select “AUTO” for
the dimmer setting.
USING THE AUTOMATIC BRIGHTNESS ADJUSTMENT FUNCTION
As described in “How to adjust the image” (p.178 to 180), select “MANUAL”
for the dimmer setting.
The unit will not modify the screen brightness even if the amount of light in the surrounding
area changes.
DISABLING THE AUTOMATIC BRIGHTNESS ADJUSTMENT FUNCTION
MONITOR
Brightness sensor
O
T
H
E
R