Filter
Top Products
1/8mi
1/8mi
Direction of
the destination
The most
detailed map
I wanted to go
to the restaurant…
Restaurant
SETTING THE DEPARTURE/WAYPOINT/DESTINATION POINTS
Set waypoint and destination using the most detailed map. Not doing so may result
in these locations being positioned differently than desired.
Example:
Having set a waypoint on a
highway parking area
Example:
Having set a destination on a local
road that has central dividers.
The point may be set in the parking area
on the opposite direction of the destination
rendering a correct route impossible.
Set the waypoint(s) using the most detailed map along the parking area or lane in
the direction of the destination.
Verify whether the destination point is positioned in the proper lane using the
most detailed map. Do not set waypoint/destination points in intersections.
The unit may set the destination along the
opposite lane or may lead you on a wide
detour.
Example:
When there is a location you want to
stop at along the route.
Example:
Set waypoints in order starting from the location nearest to the departure point
(present location).
Example:
Wanting to get on/off a desired highway interchange.
If a waypoint(s) is not set, a route
() that doesn’t pass through
desired stops may be provided.
Set the waypoint at the desired IC entrance (exit).
If not setting a waypoint(s), the unit may select an undesired IC leading you on a route
() with a wide detour.
Waypoint
Destination
Departure
I want to stop
at the restaurant
Restaurant
Good example Bad example
Waypoint1
Waypoint3
Waypoint1
Waypoint3
Waypoint4
Waypoint4
Waypoint2
Waypoint2
Destination Destination
Departure Departure
Highway
To Destination
Departure
Highway
Undesired
interchange
Desired
interchange
Set the waypoint at the
desired interchange
entrance (exit).
Waypoint
Local road
1/8mi
Aquarium
RIVER
I really wanted
to take
this road…
Example:
A map with “---Aquarium” is selected from “Searching
for points of interest and retail establishments” and a
destination point is registered.
The departure/waypoint/destination point marks
are registered right on the POI, however, the
actual departure/waypoint/destination points for
the route search are set along the roads
available in the search data that are nearest to
the registered points. Because of this, the set
route may be different from the roads you
intended to take.
To avoid this, use the most detailed map to
register the point along the desired road that
is available in the search data in the proper
lane heading towards the destination.
193 194
POINTERS ON REGISTERING WAYPOINT AND DESTINATIONS
FINDING A POI MAP VIA A MENU SEARCH
Because this road is the nearest
to the destination mark, the point
along the road across the river
becomes the actual destination
point of the route search.
If having registered a departure / waypoint /
destination point on a road not available in the
search data, the actual position of the point will be
set by the route search on the available road
nearest to those registered points in a straight
line. To determine whether a road is available in
the search data, see the roadmap legend in the
map disc’s instruction manual.
v
Advise
SKILLFULLY CONSTRUCT A ROUTE USING WAYPOINTS
O
T
H
E
R