Filter
Top Products
68
N
A
V
I
67
Example
Viewing the GPS Information screen
Press the É button.
1
Most of the operations for the navigation system are effectuated using the menu.
It is an important tool to ensure the proper operation of the unit. Become well
accustomed to the menu.
Select from the drop-down menu and press the
Ä button.
GPS Information
2
When finished viewing…
< When selecting , press the Ä button or the Å
button on the remote control.
The display returns to the menu screen.
< Press the Ñ button.
The display returns to the present location map.
< Press the É button.
This display returns to the menu screen.
BACK
3
BASIC MENU OPERATIONS
Present location display screen (example)
Press the Ñ button
to confirm the present location
positioning.
1
Press the Ç button
on the present location display.
2
Select and press the
Ä button.
This initiates a reference route search.
When the search is complete, wait a
moment until the route guidance screen
appears.
You can interrupt searches by pressing
the É button.
YES
3
SEARCHING FOR A ROUTE
FROM THE PRESENT
LOCATION TO YOUR HOME
If this mark is yellow,
the positioning is O.K.!
¡To search for a route home, it
is necessary to register the
location of your home in
advance.
zSee p.70.“About the quick
menu”.
zSee p.84.“Registering
your home”.
¡When initiating a new route
search, the previously
searched reference route is
deleted. To save the reference
route in the memory, refer to
“Storing the present route”.
¡Reference routes vary
depending on the map disc.
It may not always select the
shortest route for you.
Hint
Depending on changes in traffic
conditions, you may not be able to drive
on the reference route provided by the
unit. In such a case, proceed following
the actual traffic conditions.
tCAUTION
QUICK ROUTE SEARCH (2)