Filter
Top Products
N
A
V
I
132
Select and press the
Ä button.
Yes
7
Heading
Correct the present location
mark with the Joystick (s)
and press the Ä
button.
6
131
MODIFYING THE PRESENT LOCATION MARK LOCATION AND BEARING
Use the joystick and align the
cursor to the present location
mark.
1
Selecting the most detailed map
enables a more accurate position
correction!
Cursor
Press the É button.
2
Select
from the drop-down
menu and press the Ä
button.
Adjust Current Location
3
Press the Ä button.
The display changes for the
bearing correction screen.
5
Verify the cursor position and
correct if necessary.
4
Cursor
Position correction screen
Bearing correction screen
Even if correcting the present location
while the unit is presently positioning
your vehicle after having connected
the GPS exterior antenna, the present
location will change to the position
determined by the GPS.
Depending on the driving conditions and
the GPS satellite, the position/bearing of
the present location mark may differ
from the actual position/bearing of your
vehicle. By making sure there is nothing
obstructing the GPS satellite signal
reception and by driving at a constant
speed, the present location
position/bearing is automatically
corrected. However, you can correct
these yourself by following the steps
below.
MODIFYING THE PRESENT
LOCATION MARK LOCATION AND
BEARING
Adjust Current Location