Filter
Top Products
98
N
A
V
I
97
Added waypoint
Original waypoint
Change search conditions.
5
q Select the waypoint to be
changed/deleted and press the
Ä button.
CHANGING/DELETING
WAYPOINTS
w
Register a new waypoint(s).
See p.95, “ ”
for the registration method.
Example of selecting waypoint 1.
IF CHANGING
e
Select and
press the Ä button.
Select and press the
Ä button.
Yes
Delete this point
IF DELETING
Example of deleting waypoint 1.
Original destination point.
q To add a location, select
and press the Ä button.
Add
ADDING WAYPOINTS
Example of adding a waypoint between
the departure point and waypoint 1.
w Register a waypoint.
See p.95, “ ”
for the registration method.
* Up to 5 waypoints can be registered.
ADDING WAYPOINTS
ADDING WAYPOINTS
MODIFYING A ROUTE (2)
q Select the search conditions
you want to change and press
the Ä button.
CHANGING SEARCH
CONDITIONS
w Because pressing the Ä
button effectuates a search
condition modification, display
the search conditions you want
to set.
To make a search condition
modification, press the
Ä button
again.
Example for “Faster Route”.
e Select or
and press the
Ä button.
If having selected ,
the route guidance screen appears
and route guidance is initiated when
the route search is complete. If having
selected , 3 route
selection screens appear. Select the
desired route and press the Ä
button to move the display to the route
guidance screen and start route
guidance.
3 Route Calculation
Calculation Start
3 Route Calculation
Calculation Start
zSee p.91, “Register the desired
destination point and set the search
conditions”.
¡If having set a waypoint(s),
will not
appear.
¡Save the desired routes in the
memory.
zSee p.100, “Saving the
present route”.
¡When the 3 route selection
screen is displayed, buttons
other than the Ä button
are disabled.
¡If having modified a route
retrieved from the memory, the
stored route cannot be
changed.
¡To stop route guidance, refer to
p.104, “Pause route guidance”.
3 Route Calculation
Hint