Filter
Top Products
HOW TO HANDLE THE REMOTE CONTROL (1)
¡Align the “+” and “–” terminals
correctly and do not mix an old with a
new battery or two different kinds of
batteries. Otherwise, the batteries may
leak and crack leading to fires and
injury.
¡Batteries cannot be recharged.
¡Installing or leaving the remote control
in direct sunlight such as the
dashboard will cause deformation and
malfunctions. Exercise caution.
¡Spilling water, beverages or solvents
onto the remote control may cause
damage. Exercise caution.
Press down on the tab and
pull the cover outward.
1
The battery inserted on the
left has its minus terminal
pointing upwards and the
right battery has its plus
terminal pointing upwards.
2
Align the bottom tab of the
cover with the groove on the
remote control and close.
3
The remote control uses two AAA
batteries.
INSERT BATTERIES IN THE
REMOTE CONTROL
tCAUTION
Push the side tabs on the
holder a bit outwards and
remove.
1
Pull it outwards.
2
REMOVE THE REMOTE
CONTROL FROM THE HOLDER
Align the tab on the bottom
of the holder with the groove
on the bottom part of the
remote control.
1