Uniden TRAX436 GPS Receiver User Manual


  Open as PDF
of 132
 
Page 85
How Do I Use It?
Arrival
(Estimated
Arrival)
Shows the estimated arrival
timeatthenaldestinationof
the route based on information
available for the remaining
segments of the route. The
calculation cannot take into
accounttrafcjamsandother
possible delays.
Tapthiseldto
change the content
ofalldataeldstovia
point information.
Distance Left Shows the distance you need
to travel on the route before
reachingyournaldestination.
Tapthiseldto
change the content
ofalldataeldstovia
point information.
Time Left Shows the time needed to reach
thenaldestinationoftheroute
based on information available
for the remaining segments of
the route. The calculation cannot
takeintoaccounttrafcjams
and other possible delays.
Tapthiseldto
change the content
ofalldataeldstovia
point information.
Method Thiseldshowshowthe
route was calculated. It either
displays the Route Calculation
MethodortheVehicleeldfrom
the Route Planning options. If
you have chosen Car, Taxi or
Bus, the type of the route (Fast,
Short, Easy or Economical) will
be displayed here; if you have
selected Emergency, Bicycle or
Pedestrian, this information will
be displayed here.
Tapthiseldto
change the content
ofalldataeldstovia
point information.
Warning
icons
Inthesesquareeldsgraphical
symbol are displayed in case
warnings are attached to the
planned route. These are
warnings, so icons always
show information for the whole
route,evenifthedataelds
display values from your current
position to a via point only.
Tap any of the icons
for an explanation.
 previous next