Uniden TRAX436 GPS Receiver User Manual


  Open as PDF
of 132
 
Page 35
How Do I Use It?
Position markers
Current GPS position and Lock-on-Road
When your GPS position is available, TRAX436 marks your current
position with the
icon on the map. The exact location of the position
marker depends on the vehicle type used for route calculation.
The vehicle type can be selected in Route settings (page 94) or in the
Quick Menu (page 89).
• Ifyouchoosepedestrian:The
icon is at your exact GPS position.
The direction of the icon shows your actual heading.
• Ifyouchooseanyofthevehicles:The
icon is aligned to the
nearest road to suppress GPS position errors. The direction of the icon is
one of the directions of the route.
To use the current GPS position, tap
. The Position menu appears
and you can save the GPS position as one of the following:
• aFavourite
• aRoadSafetyCamera
• aPOI
• amapmarkerPin
Return to normal navigation
When GPS position is available, and you have moved the map (the
icon is moving or is not even visible), or you have rotated the map in 3D
mode, the
button appears. Tap it to move the map back to the GPS
position and re-enable Track-up map orientation (automatic map rotation).
Even if you move the map while you are driving,
TRAX436 continues navigating if there is an active route:
it plays the voice instructions and displays the turn
preview icons according to your current GPS position.
NOTE
 previous next