Uniden TRAX436 GPS Receiver User Manual


  Open as PDF
of 132
 
Page 114
How Do I Use It?
Type Description
Power
Management
You can set how the backlight will behave when the
screen has not been touched for a while. You have
the following options:
•BacklightAlwaysOn:Thescreeniscontinuouslylit.
•SmartPowerSave:Whenrunningonbattery,
Smart Powersave will light up the screen only when
you press a button, tap the screen, or if there is
something to show you. After a few seconds the
light level decreases, and after another few seconds
the backlight turns off. This helps achieve a longer
battery life.
Backlight at
Daytime
You can set the backlight level for daytime use.
Backlight at Night You can set the backlight level for night use.
Track Log settings
YoucansetupanautomaticTrackLogsaving,andne-tuneitssettings.
Tap the following buttons:
, , .
Type Description
Update
Interval
This is how often track points will be saved. Position
information is normally received once a second from the
GPS. If you do not need such a detailed log, you can
increase this number to save track log space.
Enable Auto-
saving
When auto-saving is enabled, you do not need to turn
track log saving on and off manually. TRAX436 will
automatically start recording the track log as soon as
GPS position is available.
Track Log
Database
Size
Thisgureshowshowmuchmemoryisusedbythe
automatically saved track logs.
 previous next