Filter
Top Products
A-19
Utilities and Diagnostic Tests
Buffers
To configure the terminal Buffers:
1. Select Buffers to display the screen shown in Figure A-22.
2. Use the UP or DOWN arrow keys to select
4, 8,
or
12
, then press ENTER.
3. Press CLEAR or ENTER to return to the main menu.
Figure A-22. Configuring the Buffers
Re-Transmit Delay
To configure the Re-Transmit Delay:
1. Select ReXmit Delay to display the screen shown in Figure A-23.
2. Use the UP or DOWN arrow keys to select
short
or
long
, then press ENTER.
3. Press CLEAR or ENTER to return to the main menu.
Figure A-23. Setting the Re-Transmit Delay
BUFFERS
Enter Buf Cnt:
8
BkSp, CLR, Enter
REXMIT DELAY
Enter Delay:
short
BkSp, CLR, Enter