Filter
Top Products
6-9
Troubleshooting
Figure 6-2. Setting up to Receive a Memory Transfer
4. Boot the VRC 6940 to Command Mode:
a. Press and hold the A and D keys.
b. Press and release the ON/OFF key.
c. Release the A and D keys.
d. The terminal boots to the function selector screen in Command Mode, as shown
in Figure 6-3. Press UP or DOWN arrows to scroll through the options.
Figure 6-3. Command Mode Screen
5. When the Memory Transfer option appears, press ENTER.
6. The systems displays this message:
Checking Memory
Please Wait
C:\>rcvhex memory.txt 38.4 1
RCVHEX Filename to receive data
(you can make one up)
Baud Rate COM Port
Command
COMMAND MODE
Select Function
Self Test