Filter
Top Products
35
Press either the < –EQV> or <+EQV > soft key to change
the EQ voltage, following your battery manufacturer’s rec-
ommendations. Note that the factory default EQ voltage
is set low, the same as the factory default Absorb voltage.
Press the <NEXT> soft key to view the BATTERY EQUALIZE
Time screen.
Press either the <-HRS> or <+HRS> soft key to set the
desired equalization time, up to a seven hour maximum,
always following your battery manufacturer’s recommen-
dations. Press the <NEXT> soft key to view the BATTERY
EQUALIZE start screen
• Press the <START> soft key to manually begin an
equalization cycle. To stop the cycle, press the <STOP>
soft key.
• EQ-MPPT display indicates the MX60 is trying to reach
the target equalize set point.
• Equalize time “EQ 0:00” in Hours:Minutes displays after
the equalize set point is reached.
• The incomplete equalization cycle continues into the
next day unless the MX60 is powered o or manually
stopped. The remaining EQ time can be viewed in the
Log2 Menu.
• EQ cycle terminates when EQ time period is reached.
• After equalizing, an EQ DONE message displayed and a
Float cycle begins.
Press the <AUTO> soft key to view the Auto Equalization
screen.
BATTERY EQUALIZE
Volts
15.0
EXIT NEX -EQV +EQV
BATTERY EQUALIZE
Time
01 Hours
EXIT NEXT -HRS +HRS
BATTERY EQUALIZE
01 Hrs 15.0 Volts
Check water level
BACK AUTO START STOP
Manual Mode