Filter
Top Products
19
PREPARING FOR RECHARGING
Turn the PV input breaker on. The MX60
automatically detects the PV input voltage.
(NOTE: If PV voltage registers “000V” when the breaker is
on, please check the polarity of the PV wires.)
After 5 seconds of stable input voltage, the MX60 enters
a “Wakeup” stage, transitions to “Sweeping” and prepares
to charge the batteries by tracking the MPP of the solar
array.
PV 113 V Bat 12.5 V
00.0 A 00.0 A
Watts 0000 Aux Off
kWHrs 00.0 Sleeping
PV 087 V Bat 12.5 V
05.0 A 32.9 A
Watts 0412 Aux Off
kWHrs 00.0 B-MPPT