Filter
Top Products
27
To adjust the minimum amount of time the PV voltage
must remain high before deactivating the AUX MODE,
press the <TIME> soft key.
Press the < - > or the < + > soft key to adjust the Hold
Time, then press the <BACK> soft key to return to the
PV Trigger screen. In this example, the AUX MODE will
remain active for 1.1 sec after the PV voltage is below the
PV Trigger voltage before deactivating the PV Trigger and
reconnecting to the array.
Press the <NEXT> soft key to view the Float screen.
The AUX MODE is active when the MX60 is in Float and
producing power. Press the <NEXT> soft key to advance
to the ERROR ALARM screen.
AUX MODE
PV Trigger
On
EXIT NEXT TIME VOLT
Hold Time Sec
01.1
BACK - +
AUX MODE
PV Trigger
Off
EXIT NEXT TIME VOLT
AUX MODE
Float
Off
EXIT NEXT