Filter
Top Products
Lighting
95
Recalling positions from memory
X
Turn memory position switch 2 to the
desired memory position.
X
Press and hold memory position switch
2 until the seat has completely moved to
the stored position. On the driver’s side,
also wait for the steering wheel and exterior
rear view mirrors to move to the stored
position.
i
Releasing the memory position button
stops movement to the stored positions
immediately.
Lighting
Notes
i
If you drive in countries where vehicles
drive on the other side of the road than the
country where the vehicle is registered, you
must have the headlamps modified for
symmetrical low beams. Relevant
information can be obtained at any
authorized Mercedes-Benz Center.
i
Vehicles equipped with active Bi-Xenon
headlamps:
The active Bi-Xenon headlamps monitor the
vehicle’s steering angle and speed, then
automatically shift their beams to either
side to better follow the curvature of the
road ahead, increasing usable illumination
over conventional headlamps.
Exterior lamp switch
$ a
Standing lamps, left
% g
Standing lamps, right
& M
Off
Daytime running lamp mode
( U
Automatic headlamp mode
Daytime running lamp mode
) C
Parking lamps (also tail lamps,
license plate lamps, side marker
lamps and instrument panel lamps)
* B
Low-beam headlamps or high-beam
headlamps
, ¥
Front fog lamps
. †
Rear fog lamp
i
If you hear a warning signal you have
forgotten to switch off the low-beam
Controls in detail
Z