Filter
Top Products
Audio system
169
i
If you have activated the automatic redial
function on your mobile phone, the number
of the person being called is automatically
redialed after a short waiting period if there
is a busy signal. Refer to the separate
operating instructions for the mobile
phone.
X
Manual redial: Press button s.
The telephone number last dialed will
appear in the display.
X
Select desired telephone number with
button Á or Â.
The letter L and the number of the memory
position appears in the left-hand corner of
the display. The numbers are stored in the
order of the calls made.
X
When you have selected a number, press
button s.
The call will be made.
Accepting an incoming call
If the telephone is active in the background
(reception symbol is visible in the display), the
audio source is muted when an incoming call
is received. A ringing tone can be heard and
the caller’s telephone number, or the name
under which the telephone number has been
saved in the telephone book, appears in the
display. If the caller’s number is not relayed,
CALL will appear in the display.
X
Press button s.
The call is accepted.
Muting a call
It is possible to mute a call; the caller is then
no longer able to hear you.
X
Mute on: Press MUT soft key.
MIC MUTE will appear in the display.
X
Mute off: Press MUT soft key again.
Terminating a call
X
Press button t.
The current call is terminated and the
muted audio source becomes active again.
Accepting a second incoming call
If you receive another call during an already
active call, you can accept the second call and
switch between the two.
X
Accepting a second call: Place new call
by entering telephone number manually.
You are connected to the second caller; the
first caller is kept on hold.
i
You will be notified of the second call
acoustically, but you will not see this in the
display.
X
Switching between calls: Press button
s.
This switches between the calls. The non-
active call is kept on hold.
X
Terminating a call: Press button t.
The current call is terminated. The
connection to the caller previously kept on
hold is also interrupted; however,
reconnection is indicated by an acoustic
signal.
Placing a second call
If you wish to place another call during an
already active call, you can place the second
call and switch between the callers or
combine them into one call. Note that this
feature is dependent on availability from your
mobile phone service provider.
Controls in detail
Z