Filter
Top Products
Seats
88
Placing rear seat head restraints upright
X
Pull the head restraint forward until it locks
into position.
Rear seat head restraint tilt
Two different head restraint angle positions
are available.
X
Press release button 1 (Y page 87) and tilt
the head restraint to the desired position.
Rear seat head restraint height
1
Release button
X
Raising: Adjust the height of the head
restraint manually by pulling it upward.
If the head restraint is fully retracted, press
release button 1 and pull the head
restraint out.
X
Lowering: To lower the head restraint,
press release button 1 and push down on
the head restraint.
Removing and installing rear seat head
restraints
1
Release button
X
Removing: Fold back head restraint
(Y page 87).
X
Pull head restraint to its highest position.
X
Press release button 1 and pull out head
restraint.
X
Installing: Insert head restraint and push
it down until it engages.
X
Make sure the proper head restraint for
each seat is installed.
X
Make sure the head restraints engage fully.
X
Press release button 1 and adjust head
restraint to desired position.
Controls in detail