Filter
Top Products
Audio system
148
Sound system
You can either program the sound settings
manually (Y page 147) or choose settings via
preset sound characteristics.
You can select from among the following
settings:
R
STANDARD: conventional stereo sound.
R
SURROUND: the sound is set for better three-
dimensional acoustic characteristics.
R
SPEECH: the sound is optimized for the
spoken word.
X
Press button O repeatedly until
STANDARD, SURROUND or SPEECH appears in
the display.
X
Press X or Y soft key repeatedly
until the desired sound setting has been
reached.
The sound is set accordingly.
or
X
Press RES soft key briefly.
The sound setting is reset depending on the
sound source activated.
R
Radio mode: STANDARD
R
CD/AUX mode: SURROUND
R
Telephone: SPEECH
The radio switches back to the standard
radio menu eight seconds after the last soft
key is pressed.
Returning sound functions to factory
settings
X
Press button O to call up settings menu
in the display.
X
Press RES soft key briefly; the respective
sound function is reset to its center level.
or
X
Press and hold RES soft key until RESET
appears in the display.
The sound settings for bass and treble are
returned to their center level and the
volume is set to a predefined level.
Vehicles with sound system:
The sound setting is reset depending on the
sound source activated.
R
Radio mode: STANDARD
R
CD/AUX mode: SURROUND
R
Telephone: SPEECH
The radio switches back to the standard
radio menu four seconds after the last soft
key is pressed.
Adjusting volume distribution
Call up fader and balance functions by
pressing button P.
Fader
X
Press button P repeatedly until FADER
appears in the display.
X
Press V or W soft key.
The volume is distributed accordingly
between the front and rear of the vehicle.
or
X
Press RES soft key briefly.
The fader is reset to its center level.
Controls in detail