Filter
Top Products
Audio system
165
operating instructions for the mobile
phone.
X
Manual redial: Press button s.
The telephone number last dialed will
appear in the display.
X
Select desired telephone number with
button Á or Â.
The letter L and the number of the memory
position appears in the left-hand corner of
the display. The numbers are stored in the
order of the calls made.
X
When you have selected a number, press
button s.
The call will be made.
Accepting an incoming call
If the telephone is active in the background
(reception symbol is visible in the display), the
audio source is muted when an incoming call
is received. A ringing tone can be heard and
the caller’s telephone number, or the name
under which the telephone number has been
saved in the phone book, appears in the
display. If the caller’s number is not
transmitted with the call, CALL will appear in
the display.
X
Press button s.
The call is accepted.
Muting a call
It is possible to mute a call; the caller is then
no longer able to hear you.
X
Mute on: Press MUT soft key.
MIC MUTE will appear in the display.
X
Mute off: Press MUT soft key again.
Terminating a call
X
Press button t.
The current call is terminated and the
muted audio source becomes active again.
Talking with two callers at the same time
If you wish to receive or place another call
during an already active call, you can accept
or place the second call and switch between
the callers or combine them into one call.
Note that the features described here are
depending on availability from your mobile
phone service provider.
X
Placing/accepting a second call: Place
new call by entering telephone number
manually.
X
Press button s.
You are connected to the second caller; the
first caller is kept on hold.
or
X
Press button s to accept a second call.
You are connected with the second caller;
the first caller is kept on hold.
i
You will be notified of the second call
acoustically, but you will not see this in the
display.
X
Switching between calls: Press buttons
2 and s.
This switches between the calls. The non-
active call is kept on hold.
X
Terminating a call: Press button t.
The current call is terminated. You are
again connected with the caller previously
placed on hold.
X
Combining two calls: Press buttons
3 and s.
The calls are combined into one call.
Controls in detail
Z