Filter
Top Products
Replacing bulbs
335
Front turn signal lamp bulb
X
Turn bulb socket 3 with the bulb
counterclockwise and remove it.
X
Gently press onto the bulb and turn it
counterclockwise out of bulb socket 3.
X
Gently press the new bulb into bulb socket
3 and turn it clockwise until it engages.
X
Place bulb socket 3 back into the housing
and turn it clockwise until it engages.
Parking and standing lamp bulb
X
Turn housing cover 2 counterclockwise
and remove it.
X
Pull out bulb socket 6 with the bulb.
X
Pull the bulb out of bulb socket 6.
X
Gently press the new bulb into bulb socket
6.
X
Reinstall bulb socket 6.
X
Align housing cover 2 and turn it
clockwise until it engages.
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following:
X
Switch off the ignition.
X
Turn the exterior lamp switch to position
M.
X
Open the trunk.
Tail lamp unit
X
Swing the trim panel covering the
corresponding rear lights to the side.
1
Connector
2
Tab
X
Disconnect electrical connector 1.
X
Pull tab 2 in the direction of the arrow.
X
Remove the bulb carrier.
Bulb carrier
3
Brake lamp
4
Backup lamp
5
Rear fog lamp (driver’s side)/tail lamp
6
Tail lamp, parking and standing lamp, side
marker lamp
7
Turn signal lamp
X
Depending on which bulb needs to be
replaced, gently press onto the respective
bulb and turn it counterclockwise out of its
bulb socket.
X
Gently press the new bulb into its bulb
socket and turn clockwise until it engages.
Practical hints
Z