Filter
Top Products
Audio system
164
X
Press and hold button Á or Â
until desired initial letter has been
reached.
or
X
Press button Á or  repeatedly
until desired entry has been reached.
The stored entries are selected in
alphabetical order with the sub-
entries.
i
Several sub-entries can be stored for
each main entry (name). These entries are
marked by a corresponding abbreviation
that appears in the upper left-hand corner
of the display. The following abbreviations
for sub-entries are possible:
CEL = Mobile phone
HOM = Home
WOR = Work
FAX = Fax
PAG = Pager
TEL = Main
X
When you have selected a number,
press button s.
The call will be made.
R
Viewing the telephone number of a phone
book entry
X
Search for desired entry.
X
Press NUM soft key.
The telephone number of the phone
book entry appears in the display.
R
Returning calls received
X
Press MEM soft key or press button
Á or Â.
X
Press RCV soft key (received calls).
The number of received calls and then
the call last received appear briefly in
the display.
X
Select desired telephone number with
button Á or Â.
The letter R and the number of the
memory position appear in the upper
left-hand corner of the display. The
numbers are stored in the order of the
calls received.
X
When you have selected a number,
press button s.
The call will be made.
R
Speed dial
If you have stored telephone numbers as
speed dial numbers in your telephone, you
can also enter these with buttons 1 to
R on the radio head unit.
X
Press desired button 1 to R
briefly.
X
Press button s.
The call will be made.
R
Turbo dial
If you have stored telephone numbers as
turbo dial numbers in your telephone, you
can also enter these with buttons 1 to
R on the radio head unit.
X
Press desired button 1 to R
until the call is made.
Redial
If the number you have dialed is busy, you can
again place calls to the last ten telephone
numbers dialed using the redial function.
i
If you have activated the automatic redial
function on your mobile phone, the number
of the person being called is automatically
redialed after a short waiting period if there
is a busy signal. Refer to the separate
Controls in detail