Filter
Top Products
Control system
142
This standby message indicates that your
telephone is ready for use and you can
operate it using the control system.
Answering a call
When your telephone is ready to receive calls,
you can answer a call at any time. In the
multifunction display you will then see the
following message, or if available, the caller
ID (number and name):
X
Press button s.
You have answered the call. The duration
of the call appears in the multifunction
display.
Ending a call or rejecting an incoming
call
X
Press button t.
Dialing a number from the phone book
When your telephone is ready to receive calls,
you may select and dial a number from the
phone book at any time.
X
Press button ÿ or è repeatedly until
the message Tel appears in the
multifunction display.
X
Press button j or k.
The control system reads the phone book
which is stored in the telephone. This may
take several minutes. The message Please
Wait appears in the multifunction display.
When the message Please Wait
disappears, the phone book has been
loaded.
X
Press button j or k repeatedly until
the desired name appears in the
multifunction display.
If you press and hold button j or
k for longer than 1 second, the system
scrolls rapidly through the list of names
until you release the button again.
The stored names are displayed in
ascending or descending alphabetical
order.
1
Selected name from the phone book
X
Press button s.
The control system dials the selected
phone number.
If the connection is successful and this
feature is supported by your network
provider, the name of the party (if stored in
your phone book) you are calling and the
duration of the call will appear in the
multifunction display.
Controls in detail