Filter
Top Products
Flat tire
340
X
Stick TIREFIT container 1 upside down
into notch 2 of the electric air pump.
8
Filler hose
9
Tire valve
X
Unscrew the valve cap of the damaged tire
from tire valve 9.
Version 1
a
Vent screw
b
Pressure gauge
X
Version 1 only: Close vent screw a on
pressure gauge b.
X
Screw filler hose 8 onto tire valve 9.
X
Insert electrical plug 4 into the cigarette
lighter socket (Y page 212) or a power
outlet (Y page 212).
X
Turn the SmartKey in the starter switch to
position 1.
or
X
Vehicles with KEYLESS-GO: Press the
KEYLESS-GO start/stop button once. Do
not depress the brake pedal.
X
Press I on electric air pump switch 3.
The electric air pump is switched on and
inflates the tire.
i
First, the sealing is pumped into the tire.
The pressure may briefly rise to up to 73 psi
(5 bar). This is normal and not an indication
of a malfunction. Do not switch off the
electric air pump.
X
Let the electric air pump inflate the tire for
approximately 5 minutes.
The pressure gauge must display at least
26 psi (1.8 bar).
G
Warning!
The air hose can become hot during
inflation. Please exercise appropriate
caution.
!
Do not operate the electric air pump
longer than 6 minutes without interruption.
Otherwise it may overheat.
You may operate the air pump again after
it has cooled off.
X
If the tire inflation pressure of at least
26 psi (1.8 bar) is not attained, turn off the
electric air pump by pressing 0 on electric
air pump switch 3.
X
Detach filler hose 8 from tire valve 9.
Practical hints