Filter
Top Products
Lighting
98
lamps should only be used in conjunction with
low-beam headlamps. Consult your State or
Province Motor Vehicle Regulations
regarding permissible lamp operation.
X
Turn the exterior lamp switch to position
C or B (Y page 95).
X
Switching on front fog lamps: Pull out the
exterior lamp switch to first stop.
The green indicator lamp ¥ in the
exterior lamp switch comes on.
X
Switching on rear fog lamp: Pull out the
exterior lamp switch to second stop.
The rear fog lamp, the front fog lamps and
the yellow indicator lamp † in the
exterior lamp switch come on.
X
Switching off front fog lamps/rear fog
lamp: Push in the exterior lamp switch to
its stop.
Locator lighting and night security
illumination
Locator lighting and night security
illumination are described in the “Control
system” section, see “Setting locator
lighting” (Y page 137) and “Setting night
security illumination (Headlamps delayed
shut-off feature)” (Y page 137).
Combination switch
1
High beam
2
High-beam flasher
High beam
X
Turn the exterior lamp switch to position
B (Y page 95).
X
Switching on: Push the combination
switch in direction of arrow 1.
The high-beam headlamp indicator lamp
A in the instrument cluster comes on.
X
Switching off: Pull the combination switch
in direction of arrow 2 to its original
position.
High-beam flasher
X
Switching on: Pull the combination switch
briefly in direction of arrow 2.
Turn signals
1
Turn signals, right
2
Turn signals, left
X
Press the combination switch in direction
of arrow 1 or 2.
The corresponding turn signal indicator
lamp L or K in the instrument
cluster flashes.
The combination switch resets automatically
after major steering wheel movements.
i
To signal minor directional changes such
as changing lanes, press combination
Controls in detail