Filter
Top Products
Vehicle status messages in the multifunction display
287
Vehicle
Display messages Possible cause/consequence Possible solution
P Selector Lever In
Park
You have opened the driver’s door while
the engine was not running and the
automatic transmission was not in park
position P.
X
Shift the automatic transmission into park
position P.
You have attempted to turn off the engine
with the KEYLESS-GO start/stop button
while the automatic transmission was not
in park position P.
X
Shift the automatic transmission into park
position P.
P Please Shift To N
or P
You have attempted to start the engine
with the KEYLESS-GO start/stop button
while the automatic transmission was in
reverse gear R or drive position D.
X
Shift the automatic transmission into park
position P or neutral position N. Make sure the
brake pedal is depressed.
Tires
Display messages Possible cause/consequence Possible solution
Check tires, then restart Run
Flat Indicator.
There has been a warning message about
a loss in the tire inflation pressure and the
Run Flat Indicator was not restarted yet.
X
Make sure the correct tire inflation pressure is
set for each tire.
X
Then restart the Run Flat Indicator
(Y page 243).
Run Flat
Indicator
Inoperative
The Run Flat Indicator is malfunctioning.
X
Have the Run Flat Indicator checked at an
authorized Mercedes-Benz Center.
Practical hints
Z