Filter
Top Products
89
Control systems
COMAND introduction
Back button
1 Back button
̈ Switching to the next highest menu:
Press L briefly.
COMAND switches to the next highest
menu level within the currently active
operating mode.
̈ Switching to the main menu: Press
and hold L.
You will hear a signal, and COMAND
switches to the main menu of the cur-
rently active operating mode.
Example of how to use COMAND
In the descriptions below, the main func-
tions always serve as the starting point for
locating the individual menu items.
Example:
“Audio” Ǟ “Audio” Ǟ “FM/AM Radio” Ǟ
“Radio” Ǟ “Save Station”
If you already see one of the submenus on
the screen (e.g. the “Audio” Ǟ “Audio” Ǟ
“Radio” submenu), it is not necessary to
perform the first steps.
The individual steps for the above-men-
tioned example are described below.
̈ Switching to the main function line:
Slide qm.
̈ Selecting “Audio” main function:
Slide omp or rotate ymz.
̈ Confirming selection: Press n.
The audio operating mode last selected
appears.
̈ Selecting “Audio” in the main menu:
Slide qm.
̈ Confirming selection: Press n.
A selection list with the functions of the
“Audio” main menu appears.
i
In the COMAND display, you will see the
submenu previously called up for each main
menu.
୴୴