Filter
Top Products
447
Controls in detail
Driving systems
Switching on or off
You can only switch on the Night View As-
sist if
ț the SmartKey in the starter switch is
set to position 2
ț it is dark
ț the light switch is set to * or B
or if the daytime driving lamps are
switched on
ț the automatic transmission is not in
position R
1 Night View Assist on or off
̈ Press button 1 up or down.
The Night View Assist image appears
on the multifunction display.
Image on multifunction display
When you switch on Night View Assist, the
image for the speed gauge changes on the
multifunction display. The speed gauge is
shown as a bar on the lower edge of the
multifunction display. The line for main
menus is no longer available. If you would
like to change a setting using the steering
wheel buttons, you must first switch off
Night View Assist.
1 Night View Assist image
2 Speedometer display
i
The infrared headlamps only come on above
a speed of approximately 9 mph (15 km/h).
Therefore, when you are at a standstill, you do
not have a complete view and cannot check the
function of the Night View Assist.
i
If you change the brightness of the instru-
ment cluster while Night View Assist is switched
on, only the brightness of the multifunction dis-
play is changed.