Filter
Top Products
150
Control systems
COMAND navigation (introduction)
Loading a DVD into the DVD changer
1 Disc slot
2 Magazine tray buttons 1 – 6
̈ Switch on COMAND (୴ page 81).
̈ Press one of the magazine tray
buttons 2.
If a disc is loaded, it will be ejected.
̈ Take disc out of slot 1.
̈ Wait until LED for magazine button 2
which you pressed flashes quickly.
̈ Slide DVD into slot 1 with printed side
facing upwards.
COMAND loads the DVD.
i
If you carry out the update with the engine
switched off and the vehicle battery has insuffi-
cient power, COMAND may automatically switch
off during the process in order to protect the bat-
tery. If this occurs, restart the update with the
engine running period. Similarly, if the SmartKey
position is unintentionally switched to 0, restart
the update.
Warning! G
Never leave the engine running in an en-
closed space. The exhaust gases contain
carbon monoxide. Inhaling exhaust gases
constitutes a health hazard and could lead
to loss of consciousness or even death.
i
Each magazine tray button 2 indicates the
status of the corresponding magazine tray by
means of an LED.
ț LED off = magazine tray is empty
ț LED constantly lit = magazine tray is loaded
ț LED flashes = CD/DVD changer requesting
disc to be loaded