Filter
Top Products
399
Controls in detail
Automatic transmission
Automatic shift program
The program mode selector switch is used
to adjust
ț shift program
ț suspension tuning of ABC (୴ page 429)
ț engine control
Program mode selector switch
C Comfort For comfort driving
S Sport For standard driving
The selected program mode appears in the
instrument cluster.
1 Current program mode
̈ Press the program mode selector
switch repeatedly until the letter of the
desired program mode appears in the
instrument cluster.
Select C for comfort driving:
ț The vehicle starts out in second
gear (both forward and reverse) for
gentler starts. This does not apply if
full throttle is applied or gear
range 1 is selected.
ț Traction and driving stability are
improved on icy roads.
ț Upshifts occur earlier even when
you give more gas. The engine then
operates at lower rpms and the
wheels are less likely to spin.
Select S for standard driving:
ț The vehicle starts out in first gear.
ț Upshifts occur later.
!
Never change the program mode when the
automatic transmission is out of park position P.
This could result in a change of driving character-
istics for which you may not be prepared.
i
The last selected program mode (C or S) is
switched on when the engine is restarted.