Filter
Top Products
248
Control systems
COMAND automatic climate control
̈ Select climate control settings Ǟ Cen-
tral climate control menu.
̈ Selecting “AC
OFF
”: Slide qmr or
rotate ymz.
̈ Confirming selection: Press n.
A checkmark appears when the cooling
is switched off.
“AC
OFF
” appears in the central menu of
the climate control settings.
Selecting “Mono” mode
“Mono” is used to adjust the climate zones
for the entire vehicle at the same time.
When the “Mono” function is switched on
and you change the climate on the driver’s
side, these changes will be carried out in
the same manner for all climate zones.
̈ Select climate control settings Ǟ Cen-
tral climate control menu.
̈ Selecting “Mono”: Slide qmr or
rotate ymz.
̈ Confirming selection: Press n.
A checkmark appears when the func-
tion has been selected.
̈ Exiting menu: Press back button L
in the center console (
୴ page 82) or
slide omp.
The “Mono” function is automatically
switched off when you:
ț change an automatic climate control
setting for the front passenger’s side
using COMAND
ț operate a button from the automatic
climate control for the front passen-
ger’s side
ț operate one of the buttons for the rear
climate control system
Warning! G
If you turn off the cooling function, the
vehicle will not be cooled when weather
conditions are warm. The windows can fog
up more quickly. Window fogging may
impair visibility and endanger you and
others.
!
If the air conditioning cannot be turned on
again, this indicates that the air conditioning is
losing refrigerant. The compressor has turned it-
self off.
Have the air conditioning checked at the nearest
authorized Mercedes-Benz Center.