Filter
Top Products
249
Control systems
COMAND automatic climate control
Adjusting footwell temperature
The “Footwell Temperature” function is
used to adjust the temperature difference
between the footwell and the rest of the
passenger compartment.
The higher the selected value, the higher
the temperature in the footwell will be.
̈ Select climate control settings Ǟ Cen-
tral climate control menu.
̈ Selecting “Footwell Temperature”:
Slide qmr or rotate ymz and then
press n.
̈ Changing temperature difference:
Slide qmr or rotate ymz.
̈ Exiting menu: Press n, back
button L in the center console
(
୴ page 82) or slide omp.
The setting is saved.
Adjusting air flow from air vents
The “Airflow” setting defines air distribu-
tion and air volume in automatic mode:
ț “Focused” (default setting, increased
air flow)
ț “Medium” (reduced air flow)
ț “Diffuse” (minimal air flow)
̈ Select climate control settings Ǟ Cen-
tral climate control menu Ǟ “Airflow”.
A selection list appears.
The current setting is indicated by a
dot R.
̈ Changing air flow: Slide qmr or
rotate ymz.
̈ Confirming selection: Press n.
i
In automatic mode, this setting optimizes
the footwell temperature when outside tempera-
tures are low.
i
In automatic mode, this setting optimizes
the air flow when outside temperatures are high.
i
When the interior ambient temperature of
the vehicle is very hot and the automatic climate
control is cooling the interior, the setting for air
flow is temporarily overridden.