Filter
Top Products
423
Controls in detail
Driving systems
Adjustment in 5 mph
(Canada: 10 km/h) increments
̈ Briefly press the DISTRONIC Plus lever
down past the resistance point in
direction of arrow 2 (
୴ page 416).
̈ Release the DISTRONIC Plus lever.
The vehicle speed decreases in incre-
ments of 5 mph (Canada: 10 km/h).
Setting to last stored speed (“Resume”
function)
̈ Briefly pull the DISTRONIC Plus lever in
direction of arrow 4 (
୴ page 416).
The DISTRONIC Plus resumes to the
last set speed, or if no speed is stored,
it will set and store the current speed.
̈ Remove your foot from the accelerator
pedal.
Deactivating DISTRONIC Plus
There are several ways to deactivate the
DISTRONIC Plus system:
̈ Briefly tip the DISTRONIC Plus lever in
the direction of arrow 3 (
୴ page 416).
or
̈ Step on the brake pedal.
DISTRONIC Plus will be deactivated.
The last speed set will be stored into
memory.
i
The set speed value is decreased in 5 mph
(Canada: 10 km/h) increments each time you
press the DISTRONIC Plus lever down past the
resistance point.
i
The new speed is set and the vehicle will de-
celerate. Keep in mind that it may take a brief
moment until the vehicle has reached the set
speed.
Warning! G
The speed stored in memory should only be
set again if prevailing road conditions per-
mit. Possible acceleration or deceleration
differences arising from returning to preset
speed could cause an accident and/or seri-
ous injury you and others.
i
Upon switching off the engine, the last
stored speed is deleted.
i
The last stored set speed is deleted when
the engine is turned off.