Filter
Top Products
266
Control systems
Instrument cluster control system
ț If the PIN or unlock code is not yet en-
tered, the message in the multifunction
display is “Please enter PIN” or “Enter
unlock code”.
ț If the telephone is switched on, the
telephone will then search for a net-
work. During this time, the multifunc-
tion display is blank. If no network
available, the multifunction display
reads “No Service”.
ț If the telephone is on, as soon as the
telephone has found a network,
“Ready” or “Ready (Roaming)” appears
in the multifunction display.
Entering the PIN or unlock code
̈ Enter the PIN or unlock code using the
telephone keypad*, Voice Control or
telephone*.
The telephone will then search for a
network.
You may carry out the following functions:
Dialing a number from the mobile
phone book
If your telephone is ready to receive calls,
you may select and dial a number from the
phone book at any time.
̈ Log on to the network (୴ page 265).
̈ Press % or $ or # to switch
to the phone book.
̈ Press % or $ to select the de-
sired name.
The stored names are displayed in as-
cending alphabetical order.
Function Page
Dialing a number from the phone
book
266
Redialing 267
Answering a call 268
Ending a call or rejecting an in-
coming call
268
i
When you insert a Mercedes-Benz approved
mobile phone into the cradle*, the control sys-
tem reads in the phone book that is saved on the
SIM card or in the phone book of the mobile
phone. This can take several minutes, depending
on how many entries each phone book contains.
When you press %, $, (, & or
# during the download of the phone book the
message “Reading telephone data, please
wait...” appears in the multifunction display.
When the message: “Reading telephone data,
please wait...” disappears, the phone book has
been loaded.