Filter
Top Products
416
Controls in detail
Driving systems
Displaying the distance graphic
In the “Assistance” menu under “Distance
display” you see the current settings for
DISTRONIC Plus. The information shown in
the multifunction display depends on
whether DISTRONIC Plus is activated or
deactivated.
̈ Press ( or & to select the
“Assistance” menu.
̈ Press % or $ to select the
“Distance display” function.
̈ Press #.
The DISTRONIC Plus distance graphic
appears and you will see one of the fol-
lowing displays on the multifunction
display.
DISTRONIC Plus activated
When you turn DISTRONIC Plus on, you will
see the set speed in the multifunction dis-
play for about 5 seconds. You then see the
following display in the multifunction dis-
play.
1 DISTRONIC Plus activated
2 Your vehicle
3 Preset distance threshold to the
preceding vehicle
4 Preceding vehicle, if detected
DISTRONIC Plus deactivated
If DISTRONIC Plus is deactivated, the stan-
dard display of DISTRONIC Plus appears in
the multifunction display.
1 Preceding vehicle, if detected
2 Actual distance to the preceding
vehicle
3 Preset distance threshold to the
preceding vehicle
4 Your vehicle
DISTRONIC Plus lever
The DISTRONIC Plus system is operated by
means of the DISTRONIC Plus lever.
i
For activating or deactivating the
DISTRONIC Plus system, see “Activating
DISTRONIC Plus” (
୴ page 417) or “Deactivating
DISTRONIC Plus” (୴ page 423).
i
The menu overview can be found on
(
୴ page 258).