Filter
Top Products
346
Controls in detail
Seats
Seat heating
The buttons for seat heating are located on
the respective door. The red indicator
lamps on the button come on to show the
heating level selected.
1 Seat heating button
̈ Switch on the ignition (୴ page 336).
̈ Switching on: Press button 1 repeat-
edly until the desired heating level is
set.
One or more red indicator lamps on the
button show the selected heating level.
̈ Switching off: Press button 1 repeat-
edly until all indicator lamps go out.
Level
3 Three indicator lamps on
(highest level)
The seat heating automatically
switches to level 2 after approxi-
mately 8 minutes.
2 Two indicator lamps on
The seat heating automatically
switches to level 1 after approxi-
mately 10 minutes.
1 One indicator lamp on
(lowest level)
The seat heating automatically
switches off after approximately
20 minutes. With seat heating
and seat ventilation* activated
the seat heating will not switch
off after 20 minutes.
off No indicator lamp on
i
If one or more of the lamps on the seat heat-
ing button are flashing, there is insufficient volt-
age available since too many electrical
consumers are turned on. The seat heating
switches off automatically.
The seat heating will switch back on again auto-
matically as soon as sufficient voltage is avail-
able.