Filter
Top Products
Magellan MAP 410 GPS Receiver 47
Coordinate System
A Coordinate System is provided for you. This option allows you to select
primary and secondary coordinates used for entering and viewing position
information. The most common is LAT/LON. You can choose from LAT/
LON, TD, UTM, OSGB, IRISH, SWISS, SWEDISH, FINNISH, FRENCH,
GERMAN, MGRS and USER GRID. The default primary coordinate
system will be Lat/Lon in Degrees/Minutes and the default secondary
coordinate system will be UTM.
If a format is required for the coordinate system you have
chosen, a pop-up menu will be displayed. Highlight your
selection and press ENTER.
Map Datum
You can change the datum the receiver uses to compute position coordinates.
You will want your receiver’s datum to match the datum on the map or chart
you are using. Use the map “legend” to determine the datum required for
the map or chart. If you are not using a map or chart or are unsure which
datum to use, select WGS84 (the default setting).
WPT NAMES
OFF
ON
WPT NAMES
OFF
ON
WPT NAMES
OFF
ON
COORD SYS
PRIMARY
SECONDARY
WPT NAMES
OFF
ON
WPT NAMESWPT NAMESLAT/LON
DEG/MIN.MM
DEG/MIN.MMM
DEG/MIN/SEC
From
any
screen.
MENU
Use UP/DOWN
ARROW KEYS to
highlight your choice.
ENTER
MARK
ENTER
MARK
ENTER
MARK
Use UP/DOWN
ARROW KEYS to
highlight SETUP.
Use UP/DOWN
ARROW KEYS to
highlight COORD SYS.
Use UP/DOWN ARROW
KEYS to highlight
PRIMARY or SECONDARY.
ENTER
MARK
You would generally want the receiver to use position coordinates in the
same map datum that is used by your maps. For example, the Irish Grid
uses the Irish datum, Finnish Grid uses the KKJ datum, Swedish Grid
uses the RT 90 datum and the Swiss Grid uses the Swiss datum.
MENU
From
any
screen.
Use UP/DOWN
ARROW KEYS to
highlight SETUP.
Use UP/DOWN
ARROW KEYS to
highlight MAP DATUM.
Use UP/DOWN ARROW
KEYS to highlight
PRIMARY or SECONDARY.
Use UP/DOWN ARROW
KEYS to highlight your
map datum of choice.
ENTER
MARK
ENTER
MARK
ENTER
MARK
ENTER
MARK
WPT NAMES
OFF
ON
WPT NAMES
OFF
ON
WPT NAMES
OFF
ON
MAP DATUM
PRIMARY
SECONDARY