Filter
Top Products
Magellan MAP 410 GPS Receiver 43
Alarms/Messages
ACCESSING THE ALARM/MESSAGE MENU
While navigating, you may decide to set an alarm in your MAP 410. Your
receiver has five types of alarms: Anchor alarm, which will notify you when
your anchored boat has drifted; Arrival alarm, which will notify you when
you are within the arrival circle of your destination; XTE alarm, which will
notify you when you have gone off course; Proximity alarm which will
notify you when you are within the proximity of any waypoints you have
chosen; and GPS alarm which alerts you when your MAP 410 is receiving
poor GPS signals.
ANCHOR ALARM
The Anchor alarm will notify that you have moved from the set position.
For example, while boating, you can set your Anchor alarm. Once anchored,
if your boat begins to drift from the set position, a pop-up window will
appear to notify that you are moving.
The beeper will sound when the GPS position is at a distance greater than
the distance you have chosen. The alarm will sound until you turn it off or
the condition is corrected. The default setting is OFF.
ARRIVAL ALARM
The Arrival alarm will notify you when you are within the arrival circle of
the destination waypoint.
From
any NAV
screen.
MENU
Use UP/DOWN
ARROW KEYS to
highlight ALARM/MSG.
Use UP/DOWN
ARROW KEYS to
highlight your choice.
ENTER
MARK
ENTER
MARK
Use UP/DOWN
ARROW KEYS to
highlight your choice.
While viewing
the Alarm/
Message screen.
Use UP/DOWN
ARROW KEYS to
highlight ANCHOR ALARM.
ENTER
MARK
ENTER
MARK
Use UP/DOWN
ARROW KEYS to
highlight your choice.
While viewing
the Alarm/
Message screen.
Use UP/DOWN
ARROW KEYS to
highlight ARRIVAL ALARM.
ENTER
MARK
ENTER
MARK
WPT NAMES
OFF
ON
WPT NAMES
WPT001 IS
WITHIN 100
ROCKS ON
LEFT
ATTENTION
F
T
P
WPT NAMES
OFF
ON
WPT NAMES
ANCHOR
OFF
100FT
250FT
500FT
WPT NAMES
OFF
ON
WPT NAMES
ARRIVAL
OFF
100FT
250FT
500FT
0.2 NM
0.5 NM
1.0 NM