Filter
Top Products
14 Magellan MAP 410 GPS Receiver
THE NAV 1 SCREEN
The NAV 1 screen displays your destination along with four selectable
navigation measurements and a graphical compass.
The NAV 1 screen displays a numerical reading at 30˚ increments with the
characters N (0°), S (180°), E (90°) and W (270°). Course is shown
numerically and represented by the Position Icon at the bottom of the screen.
Above the compass, bearing will be displayed with the icon of the
destination waypoint. When the bearing to your destination cannot be
displayed within the confines of the displayed compass, an arrow will be
displayed either on the right or left to indicate the steering direction.
Ideally, when you are navigating, the Position Icon and the Destination Icon
should line up, one above the other.
Customizing the NAV 1 Screen
You can change the four navigational fields. You can
choose from BRG, DST, SOG, COG, VMG, CTS, ETA,
ETE, XTE, TRN, ALT, TME, TMP and Blank.
DST
50.2
SOG
8.2
XTE
3.80
R
VMG
7.2
BRG
COG
150
150
120 S
K
T
K
T
n
m
127
°
m
n
m
°
m
TO: FISH
Position Icon
Destination
Name
Destination Icon
Selectable
Navigation
Data
Compass
WPT NAMES
OFF
ON
WPT NAMES
OFF
ON
WPT NAMESCUSTOMIZE
BRG 027°
m
DST 50.2
nm
SOG 8.2
KT
COG 056°
m
VMG 7.2
KT
CTS 028°
m
ETA 01:09P
ETE 02H24M
XTE L.2
nm
TRN L26°
ALT 83
TME 01:09P
TMP 25°C
BLANK
F
T
From the
NAV 1
screen.
MENU
Use UP/DOWN ARROW
KEYS to highlight the
field you wish to change.
A pop-up
menu appears.
Use UP/DOWN
ARROW KEYS to
highlight CUSTOMIZE.
Use UP/DOWN
ARROW KEYS to
highlight your choice.
You are returned
to the NAV1 screen
in the customize mode.
You can continue customizing
using the same steps or
press QUIT to exit this mode.
ENTER
MARK
ENTER
MARK
ENTER
MARK