Filter
Top Products
Magellan MAP 410 GPS Receiver 27
Resetting the Odometer
To reset the odometer use the following keystrokes:
Resetting the Trip Odometer
Use the following keystrokes to reset your MAP 410’s trip odometer:
Setting the Speed Average
You may want to reset the Speed Average field in your receiver. You can
choose from TRIP, 5, 30 seconds, 1, 5 minutes or 1 hour. The TRIP option is
the average over the whole trip. The default is 30 seconds.
THE TIME SCREEN
The TIME screen displays the current time, estimated time
enroute (ETE), time of arrival and elapsed time in regards
to the route you are navigating in. The first data field can
be customized to correct the current time and to select the
time format.
WARNING
RESET
ODOMETER
TO 000?
YES
NO
From the
Speed
screen.
MENU
A pop-up
confirmation
window appears.
Use UP/DOWN
ARROW KEYS to
highlight YES or NO.
Use UP/DOWN
ARROW KEYS to
highlight ODOM RESET.
ENTER
MARK
ENTER
MARK
From the
Speed
screen.
MENU
A pop-up
confirmation
window appears.
Use UP/DOWN
ARROW KEYS to
highlight YES or NO.
Use UP/DOWN
ARROW KEYS to
highlight TRIP RESET.
ENTER
MARK
ENTER
MARK
WARNING
RESET
TRIP
TO 000?
YES
NO
SPEED AVG
TRIP
5 SECONDS
30 SECONDS
1 MINUTE
5 MINUTES
1 HOUR
From the
Speed
screen.
MENU
Use UP/DOWN
ARROW KEYS to
highlight SPEED AVG.
A pop-up
window
appears.
Use UP/DOWN ARROW KEYS
to highlight TRIP, 5 SECONDS, 30
SECONDS, 1 MINUTE, 5 MINUTES or 1 HOUR.
ENTER
MARK
ENTER
MARK
03:54:21
01:09:24
02:24:56
04:34:20
P
M
P
M
ELAPSED
ETE
TIME
OF ARRIVAL
The TIME screen defaults to OFF. To view this screen you will need to
turn it ON. See Enabling/Disabling NAV Screens section for further
details.